An Investigation into a Gear-Based Knee Joint Designed for Lower Limb Prosthesis

<table class="table-group" id="tab2"><tr><td><table class="table"><tr><td class="thead-hr" colspan="2"><hr/></td></tr><tr class="thead"><td class="align_left">Constraints</td><td class="align_center">Values</td></tr><tr><td class="thead-hr" colspan="2"><hr/></td></tr><tr><td class="align_left">Motor rotation</td><td class="align_center">Oscillating</td></tr><tr><td class="align_left">Frequency</td><td class="align_center">0.5 Hz</td></tr><tr><td class="align_left">Angle of rotation by each gear</td><td class="align_center">0°~7.5°, and 0°~35°</td></tr><tr class="table-tr"><td colspan="2"><hr class="tbody-hr"/></td></tr></table></td></tr></table>

Boundary conditions of the knee joint simulation.

Applied Bionics and Biomechanics

tab2

Table 2

Table 2: An Investigation into a Gear-Based Knee Joint Designed for Lower Limb Prosthesis 