Guidance on Setup, Calibration, and Validation of Hydrodynamic, Wave, and Sediment Models for Shelf Seas and Estuaries

<div>Simple examples of a hydrodynamic model calibration: (a) measured (P1 and P2) and predicted (M1 and M2) water levels at two locations with Cd set to 0.0035 in the model; (b) the same plot as (a) with Cd = 0.002; and (c) the same plot as (a) with the bathymetry corrected by +0.45 m.</div>

Advances in Civil Engineering

fig4

Figure 4

Figure 4: Guidance on Setup, Calibration, and Validation of Hydrodynamic, Wave, and Sediment Models for Shelf Seas and Estuaries 