Internet of Things-Based Concrete Curing Invention for Construction Quality Control

Table 4

Experiment B procedures.

Steps	Starts once 3 sets of samples in Experiment A reach the final set (225 minutes after placing)
1	Measure and record concrete temperature and surface dampness just after water added both manually and automatically
2	Measure the surface dampness and temperature of the 3 sets of concrete at 5 minute intervals
3	Record the readings
4	Repeat Step 3 until 24 sets of readings have been recorded (2 hours)
5	Measure the water used for IoT-based curing and manual-based curing
6	Compare and discuss the results in Step 5 and Step 6