|
| Parameters | Description/Uses | Exchange models (EMs) |
|
| Panel construction solution ID | Identifies the type of construction solution designed for the panel, i.e., the configuration of its timber core (cross section, spacing, and structural grade) and the rest of the cladding layers of the solution (e.g., bracing plates, termination plates, and insulation) | EM_01–EM_05 |
| Panel weight | Relevant for panel loading control and to be able to quote the correct equipment, relevant for the analysis of lifting systems and logistics | EM_01–EM_05 |
| Anchorage specification (hold down or the anchorage system) | Parameter that may be relevant in case the logistics of the anchorage elements is the responsibility of the manufacturing plant and requires information on their specification. The importance of this parameter lies in assuring that the CNC machining to be performed on the panel correctly installs the anchor according to the project design | EM_01–EM_05 |
| Panel has MEP installations | Identifies whether the panel in question has electrical, mechanical, or plumbing installations | EM_02–EM_05 |
| Panel assembly location | Defines where the panel is to be assembled, either in the factory or on site | EM_03–EM_05 |
| Number of additional studs | Relevant for correct panel assembly | EM_03–EM_05 |
| Interior and perimeter plate nailing pattern | Relevant for material quantities, cost estimates of the off-site construction company, and correct execution of the patterns in plant according to the design specifications | EM_03–EM_05 |
| Cost per square meter of panel | Relevant for cost estimation and financial evaluation of the project | EM_01 |
| Panel ID | Relevant for the identification, management, and control of the panel to be manufactured | EM_01–EM_05 |
| Panel fabrication table ID | Relevant for plant planning and production capacity. Obtaining this parameter involves a process of analysis and optimization during the design phase of the project | EM_01–EM_04 |
| Transport identifier code | Code identifying the package and/or truck where the panel in question will be transported | EM_04–EM_05 |
| Identifier code to indicate the company/shift that manufactures a panel | Identifies the team responsible for manufacturing the panel | EM_04–EM_05 |
| Identifier code of procedures/details at the factory | A code or description associated with a procedure or detail to be performed in the manufacture of the panel (reinforcement with screws, insulation placement, etc.) is defined | EM_04 |
| Site/assembly procedure identifier code | Indicates if the panel requires a special procedure on site or during assembly, e.g., special lifting requirements and reinforcement | EM_05 |
| Panel assembly sequence identifier code | Code specifying the order in which the panel is assembled on site | EM_04–EM_05 |
| Wood structural grading | Specifies the structural grade of the wood used on the panel | EM_02–EM_05 |
| Type of treatment applied to the wood | Specifies if the wood used for the panel considers a specific treatment | EM_04 |
| Acoustic, waterproof, or fire seals ID | Indicates if the panel requires the installation of special seals, either on site or at the plant to ensure regulatory requirements | EM_04–EM_05 |
| Storage conditions | Specifies if the panel requires any special storage | EM_04–EM_05 |
| Equilibrium moisture in plant | Specifies the equilibrium moisture as the condition in which the panel was manufactured | EM_05 |
|
