Influence of Plate Position on Uplift Failure State and Bearing Capacity of NT-CEP Pile Groups

Table 3

Data table of different plate positions of two-, four-, six-, and nine-pile models (R = 800 mm is the overhang diameter of the plate).

	Groups
Two-pile	T1	T2	T3	T4	—	—	—	—
Four-pile	—	F1	F2	F3	F4	F5	F6	F7
Six-pile	—	S1	S2	S3	S4	S5	S6	S7
Nine-pile	—	N1	N2	N3	N4	N5	N6	N7
L1	4R	6R	7R	8R	9R	10R	12R	14R