Investigating the Possibility to Reduce the Residual Stress Level in 2.5D Cutting Using Titanium Coated Carbide Ball End Mill

<table class="table-group" width="800px"><tr class="fig-image" id="a"><td><img alt="485267.fig.009a" src="https://static-preview.hindawi.com/articles/amse/volume-2014/485267/figures/485267.fig.009a.jpg"/></td></tr><tr class="fig-caption"><td align="center"><table><tr><td><b>(a) </b>Lower machined surface inclination angle</td></tr></table></td></tr><tr class="fig-image" id="b"><td><img alt="485267.fig.009b" src="https://static-preview.hindawi.com/articles/amse/volume-2014/485267/figures/485267.fig.009b.jpg"/></td></tr><tr class="fig-caption"><td align="center"><table><tr><td><b>(b) </b>Higher machined surface inclination angle</td></tr></table></td></tr></table>

<table>Machining processes with different machined surface inclination angles.</table>

Advances in Materials Science and Engineering

fig9

Figure 9

Figure 9: Investigating the Possibility to Reduce the Residual Stress Level in 2.5D Cutting Using Titanium Coated Carbide Ball End Mill 