Effect of Mg Content and Heat Treatment on the Mechanical Properties of Low Pressure Die-Cast 380 Alloy

<table class="table-group" id="tab4"><tr><td><table class="table"><tr><td class="thead-hr" colspan="3"><hr/></td></tr><tr class="thead"><td class="align_left" rowspan="2">Alloy code</td><td class="align_center" colspan="2">Condition</td></tr><tr class="thead"><td class="align_center">After casting</td><td class="align_center">After SHT</td></tr><tr><td class="thead-hr" colspan="3"><hr/></td></tr><tr><td class="align_left">DCM0</td><td class="align_center">0.015</td><td class="align_center">0.50</td></tr><tr><td class="align_left">DCM3</td><td class="align_center">0.018</td><td class="align_center">0.80</td></tr><tr><td class="align_left">DCM5</td><td class="align_center">0.018</td><td class="align_center">1.20</td></tr><tr class="table-tr"><td colspan="3"><hr class="tbody-hr"/></td></tr></table></td></tr></table>

Porosity volume fraction (%) measured in the three studied alloys.

Advances in Materials Science and Engineering

tab4

Table 4

Table 4: Effect of Mg Content and Heat Treatment on the Mechanical Properties of Low Pressure Die-Cast 380 Alloy 