Taguchi Robust Design for Optimizing Surface Roughness of Turned AISI 1045 Steel Considering the Tool Nose Radius and Coolant as Noise Factors

<div>Screenshots from surface roughness tester for optimum machining conditions at each noise factors combination as shown in Table <a href="../tab7/">7</a>. (a) Test run-1; (b) test run-2; (c) test run-3; (d) test run-4.</div>

Advances in Materials Science and Engineering

fig6

Figure 6

Figure 6: Taguchi Robust Design for Optimizing Surface Roughness of Turned AISI 1045 Steel Considering the Tool Nose Radius and Coolant as Noise Factors 

Figure 6 | Taguchi Robust Design for Optimizing Surface Roughness of Turned AISI 1045 Steel Considering the Tool Nose Radius and Coolant as Noise Factors 