Experimental Study on Electrode Wear of Diamond-Nickel Coated Electrode in EDM Small Hole Machining

<table class="table-group" id="tab4"><tr><td><table class="table"><tr><td class="thead-hr" colspan="2"><hr/></td></tr><tr class="thead"><td class="align_left">Parameter</td><td class="align_center">Description</td></tr><tr><td class="thead-hr" colspan="2"><hr/></td></tr><tr><td class="align_left">Input</td><td class="align_center">AC 220 V ± 10% 50 Hz ± 2 Hz</td></tr><tr><td class="align_left">DC output</td><td class="align_center">0.0–30.0 V, 0.00–5.00 A</td></tr><tr><td class="align_left">Power</td><td class="align_center">120 W</td></tr><tr><td class="align_left">Resolution</td><td class="align_center">100 mV, 10 mA</td></tr><tr class="table-tr"><td colspan="2"><hr class="tbody-hr"/></td></tr></table></td></tr></table>

<div>Specifications of DC power supply for electrolysis.</div>

Advances in Materials Science and Engineering

tab4

Table 4

Table 4: Experimental Study on Electrode Wear of Diamond-Nickel Coated Electrode in EDM Small Hole Machining 