The Finite Element Modulation of Thermostressed State of Coating Formation at Electric Contact Surfacing of “Shaft” Type Parts

<div>The distribution of equivalent stresses in the thermal deformation hearth (a, b) and in the zone of tape contact with the surface of the part (c) in the electrocontact surfacing of the steel strip at <i>K</i><sub>v</sub> = 1.0 and the impulse width of the current <i>t</i><sub>imp</sub> = 0.04 sec.</div>

Advances in Materials Science and Engineering

fig13

Figure 13

Figure 13: The Finite Element Modulation of Thermostressed State of Coating Formation at Electric Contact Surfacing of “Shaft” Type Parts 