The Finite Element Modulation of Thermostressed State of Coating Formation at Electric Contact Surfacing of “Shaft” Type Parts

<div>The distribution of equivalent stresses in the thermal deformation hearth (a, b) and in the contact zone of the tapes with the surface of the part (c) in the case of electrocontact surfacing of the steel tape at <i>K</i><sub>v</sub> = 1.0 and the impulse width of the current <i>t</i><sub>imp</sub> = 0.05 sec.</div>

Advances in Materials Science and Engineering

fig14

Figure 14

Figure 14: The Finite Element Modulation of Thermostressed State of Coating Formation at Electric Contact Surfacing of “Shaft” Type Parts 