Effects of Fabrication Parameters on the Properties of Parts Manufactured with Selective Laser Sintering: Application on Cement-Filled PA12

<div>SEM micrograph showing the end-of-vector (EOV) effect in the SLS process; LP = 7 watt (ED = 0.051 J/mm<sup>2</sup>) at 10% weight fraction of white cement.</div>

Advances in Materials Science and Engineering

fig9

Figure 9

Figure 9: Effects of Fabrication Parameters on the Properties of Parts Manufactured with Selective Laser Sintering: Application on Cement-Filled PA12 

Figure 9 | Effects of Fabrication Parameters on the Properties of Parts Manufactured with Selective Laser Sintering: Application on Cement-Filled PA12 