The Effect of α-Al(MnCr)Si Dispersoids on Activation Energy and Workability of Al-Mg-Si-Cu Alloys during Hot Deformation

Table 3

Safe processing domains of 6061 and WQ1.

Alloys	Low strain rate domains (I & II)	High strain rate domains (III)
6061	485–550°C, 0.01–0.08 s^−1	530–550°C, 6–10 s^−1
	440–480°C, 0.05–0.6 s^−1
WQ1	485–550°C, 0.01–0.1 s^−1