Research Article
Study of the Effect of Process Parameters on Surface Profile Accuracy in Single-Point Incremental Sheet Forming of AA1050-H14 Aluminum Alloy
Figure 5
(a) and (b) Effect of f on normalized circularity error at d = 20 mm and s = 0.5 mm, (c) and (d) effect of s on normalized circularity error at d = 10 mm and f = 1000 mm, and (e) and (f) effect of d on normalized circularity error at f = 500 mm and s = 1 mm.
| (a) | 
| (b) | 
| (c) | 
| (d) | 
| (e) | 
| (f) |