The Enhanced Performance of Phase-Change Materials via 3D Printing with Prickly Aluminum Honeycomb for Thermal Management of Ternary Lithium Batteries

<div>Stress-strain curves and images of the CPCM specimens after the compression strength test. (a), (b), and (c) are the images of the samples after the compression strength test.</div>

Advances in Materials Science and Engineering

fig11

Figure 11

Figure 11: The Enhanced Performance of Phase-Change Materials via 3D Printing with Prickly Aluminum Honeycomb for Thermal Management of Ternary Lithium Batteries 

Figure 11 | The Enhanced Performance of Phase-Change Materials via 3D Printing with Prickly Aluminum Honeycomb for Thermal Management of Ternary Lithium Batteries 