The Enhanced Performance of Phase-Change Materials via 3D Printing with Prickly Aluminum Honeycomb for Thermal Management of Ternary Lithium Batteries

<div>Schematic of the PW/EG/CF/HDPE and PW/EG/CF/HDPE/3D Al-Hc composite samples that were formed by melt mixing. (a) Schematic diagram of the preparation process of the PW/EG/CF/HDPE. (b) Preparation of the CPCM samples.</div>

Advances in Materials Science and Engineering

fig2

Figure 2

Figure 2: The Enhanced Performance of Phase-Change Materials via 3D Printing with Prickly Aluminum Honeycomb for Thermal Management of Ternary Lithium Batteries 

Figure 2 | The Enhanced Performance of Phase-Change Materials via 3D Printing with Prickly Aluminum Honeycomb for Thermal Management of Ternary Lithium Batteries 