Combined Technology for the Parts Recovery Operating in Stress Factor Conditions

<table class="table-group" id="tab17"><tr><td><table class="table"><tr><td class="thead-hr" colspan="5"><hr/></td></tr><tr class="thead"><td class="align_left">Parameter</td><td class="align_center">Medium</td><td class="align_center">Shift</td><td class="align_center">Minimum</td><td class="align_center">Maximum</td></tr><tr><td class="thead-hr" colspan="5"><hr/></td></tr><tr><td class="align_left">Length (mm)</td><td class="align_center">25.21</td><td class="align_center">0.85</td><td class="align_center">11.92</td><td class="align_center">51.48</td></tr><tr class="table-tr"><td colspan="5"><hr class="tbody-hr"/></td></tr></table></td></tr></table>

<div>Indicators of deposited steel С45 samples grain sizes after treatment by high-frequency currents and air cooling.</div>

Advances in Materials Science and Engineering

tab17

Table 17

Table 17: Combined Technology for the Parts Recovery Operating in Stress Factor Conditions 