Combined Technology for the Parts Recovery Operating in Stress Factor Conditions

<table class="table-group" id="tab2"><tr><td><table class="table"><tr><td class="thead-hr" colspan="4"><hr/></td></tr><tr class="thead"><td class="align_left">Steel grade</td><td class="align_center"><i>I</i> (kА)</td><td class="align_center"><i>Р</i> (kN)</td><td class="align_center"><i>T</i><sub>imp</sub> (sec)</td></tr><tr><td class="thead-hr" colspan="4"><hr/></td></tr><tr><td class="align_left">C25</td><td class="align_center">6.0</td><td class="align_center">1.25</td><td class="align_center">0.04</td></tr><tr><td class="align_left">С40</td><td class="align_center">6.0</td><td class="align_center">1.25</td><td class="align_center">0.04</td></tr><tr><td class="align_left">530H40</td><td class="align_center">6.5</td><td class="align_center">1.5</td><td class="align_center">0.06</td></tr><tr class="table-tr"><td colspan="4"><hr class="tbody-hr"/></td></tr></table></td></tr></table>

<div>Modes of electrocontact surfacing of samples from different steel grades.</div>

Advances in Materials Science and Engineering

tab2

Table 2

Table 2: Combined Technology for the Parts Recovery Operating in Stress Factor Conditions 