Investigating the Material Removal Rate Parameters in ECM for Al 5086 Alloy-Reinforced Silicon Carbide/Flyash Hybrid Composites by Using Minitab-18

<div>(a): MRR vs. feed rate. (b) MRR vs. voltage. (c) MRR vs. electrolyte concentration. (d) MRR vs. SN ratio.</div>

Advances in Materials Science and Engineering

fig4

Figure 4

Figure 4: Investigating the Material Removal Rate Parameters in ECM for Al 5086 Alloy-Reinforced Silicon Carbide/Flyash Hybrid Composites by Using Minitab-18 

Figure 4 | Investigating the Material Removal Rate Parameters in ECM for Al 5086 Alloy-Reinforced Silicon Carbide/Flyash Hybrid Composites by Using Minitab-18 