Investigating the Material Removal Rate Parameters in ECM for Al 5086 Alloy-Reinforced Silicon Carbide/Flyash Hybrid Composites by Using Minitab-18

Table 7

ANOVA result for machining (MRR).

Source	DF	Seq-SS	Adj-SS	Adj-MS	F value	P value	Contribution (%)
F	3	0.000008	0.000006	0.000002	1.15	0.404	47
V	3	0.000003	0.000000	0.000000	0.02	0.996	17.6
E	3	0.000004	0.000001	0.000000	0.18	0.906	23.5
Residual error	6	0.000002	0.000010	0.000002			11.8
Total	15	0.000017