Study of Complex Helical Drill with a “S” Type Chisel Edge Tip Orient to Carbon Fiber Reinforced Plastics

<table class="table-group" id="tab1"><tr><td><table class="table"><tr><td class="thead-hr" colspan="2"><hr/></td></tr><tr class="thead"><td class="align_left">Reinforcing material</td><td class="align_center">Carbon fiber</td></tr><tr><td class="thead-hr" colspan="2"><hr/></td></tr><tr><td class="align_left">Base material</td><td class="align_center">Epoxy</td></tr><tr><td class="align_left">Layer form</td><td class="align_center">0°/90° weaving prepreg cloth</td></tr><tr><td class="align_left">Fiber volume fraction (%)</td><td class="align_center">60</td></tr><tr><td class="align_left">Thickness (mm)</td><td class="align_center">5</td></tr><tr><td class="align_left">Length (mm)</td><td class="align_center">400</td></tr><tr><td class="align_left">Width (mm)</td><td class="align_center">400</td></tr><tr class="table-tr"><td colspan="2"><hr class="tbody-hr"/></td></tr></table></td></tr></table>

Advances in Materials Science and Engineering

tab1

Table 1

Table 1: Study of Complex Helical Drill with a “S” Type Chisel Edge Tip Orient to Carbon Fiber Reinforced Plastics 