[Retracted] Optimizing the Parameters of Zirconium Carbide and Rice Husk Ash Reinforced with AA 2618 Composites

Table 5

Output of the experiments.

Standard order units	Run order	A-reinforcement (wt%)	B-speed (m/min)	C-feed (mm/rev)	D-depth of cut (mm)	Ra (μm)	Tool wear (μm)	MRR (g/min)
19	1	0	210	0.6	1.5	0.98	69.6	8
23	2	10	190	0.4	2	0.78	56	14.5
20	3	20	210	0.6	1.5	1.6	60.7	10
7	4	10	210	0.2	2	1.4	31	16
17	5	0	210	0.2	1.5	0.92	18.6	9.5
12	6	20	210	0.4	2	1.41	62	12.5
8	7	10	210	0.6	2	1.03	89.9	8
2	8	20	190	0.4	1.5	1.3	35	9
25	9	0	210	0.4	1.5	1.03	41.5	11.5
6	10	10	210	0.6	1	1.41	29.6	15
13	11	10	190	0.2	1.5	0.75	17.8	15
4	12	20	210	0.4	1.5	0.78	42.2	7
5	13	10	210	0.2	1	0.55	10	18.5
24	14	10	230	0.4	2	1.46	65	8.5
2	15	10	210	0.4	1.5	0.82	39.8	20
26	16	10	210	0.4	1.5	1.06	41.2	19
1	17	0	190	0.4	1.5	1.2	35.3	9.5
15	18	10	190	0.6	1.5	1.22	53.9	11
14	19	10	230	0.2	1.5	1.25	21.8	10.5
3	20	0	230	0.4	1.5	1.06	42	4.5
9	21	0	210	0.4	1	0.85	18.8	16.5
18	22	20	210	0.2	1.5	0.8	20	10.5
22	23	10	230	0.4	1	1.02	21.56	7.5
11	24	0	210	0.4	2	0.65	59.58	15
10	25	20	210	0.4	1	0.74	20	11
21	26	10	190	0.4	1	0.65	18	13
16	27	10	230	0.6	2	1.6	65.64	4.5