|
| Authors | Applied MCDM methods | Material selection applications |
|
| Athawale and Chakraborty [3] | SAW, WPM, AHP, TOPSIS, GTMA, VIKOR, ELECTRE II, PROMETHEE II, GRA, and ROVM | Selection of materials for sailing-boat mast, flywheel, and cryogenic storage tank |
| Yang et al. [4] | SAW, TOPSIS, GRA, PSI, WPM, and PROMETHEE | Selection of magnesium alloy material for automotive wheels |
| Won Chol et al. [5] | Quadrant circular constellation graph-based method, RSR, SAW, WPM, TOPSIS, GRA, VIKOR, and PROMETHEE | Selection of magnesium alloy material for automotive wheels |
| Yang et al. [6] | TOPSIS with some popular normalization methods | Selection of boron-based tribological coating material |
| Çalıskan et al. [9] | EXPROM 2, TOPSIS, and VIKOR | Selection of best material for the tool holder used in hard milling |
| Çalıskan [10] | EXPROM 2, TOPSIS, and VIKOR | Selection of boron-based tribological hard coating materials |
| Jahan et al. [11] | WPM, fuzzy approach, VIKOR, ELECTRE, and linear assignment method | Material selection for flywheel, spar of an aircraft, and sailing-boat mast |
| Jahan et al. [12] | Traditional VIKOR, revised VIKOR, and new version of VIKOR | Selection of material for hip joint prosthesis, material selection of metallic bipolar plates for polymer electrolyte fuel cell, selection of product materials for operating in a high-temperature environment, selection of material for a sailing-boat mast |
| Maniya and Bhatt [13] | PSI, GTMA, and TOPSIS | Three material selection problems such as manufacturing environment, material selection for typical wind turbine blades |
| Khorshidi and Hassani [14] | TOPSIS and PSI | Selection of optimal Al–SiC composite with highest strength and workability |
| Kumar and Suman [15] | SAW, WPM, AHP, multiplicative AHP, TOPSIS, and modified TOPSIS | Selection of magnesium alloy material for automotive wheel |
| Kumar and Singal [16] | AHP, TOPSIS, and modified TOPSIS | Penstock material selection in small hydropower plants |
| Mousavi-nasab and Sotoudeh-anvari [17] | DEA, VIKOR, TOPSIS, ELECTRE II, COPRAS, and MOORA | Material selection for flywheel, material selection for sailing-boat mast, material selection in low voltage systems, material selection for a cryogenic |
| Mousavi-nasab and Sotoudeh-anvari [18] | COPRAS, TOPSIS, and VIKOR | 10 examples for material selection (material selection for load wagon walls, material selection for flywheel, material selection for a cryogenic tank, etc.) |
| Maity and Chakraborty [19] | PROMETHEE II, COPRAS, TOPSIS, VIKOR, AHP, and ANP | Tool steel material selection |
| Shanian and Savadogo et al. [20] | ELECTRE I and ELECTRE II | Material selection for a loaded thermal conductor |
| Shanian and Savadogo et al. [21] | Ordinary TOPSIS, block TOPSIS, and VIKOR | Selection of mass produced nonheat-treatable cylindrical cover materials |
| Tian et al. [22] | AHP and gray correlation TOPSIS | Selection of optimal green decoration materials |
| Yazdani and Payam [23] | Ashby, VIKOR, and TOPSIS | Material selection for different applications of MEMS electrostatic actuators |
|
