Investigation of Parameters of Fused Deposition Modelling 3D Prints with Compression Properties

Table 1

Minimum and maximum compression forces on 3D print samples.

Compression force on		1D	2D	3D	4D	5D	6G	11D	12D	13G
Top	Maximum (N)	49.43	89.10	149.2	116.1	191.1	39.10	135.2	98.68	72.34
	Minimum (N)	46.62	83.50	138.5	108.5	176.9	37.24	125.2	91.70	68.50
	Average	47.69	85.64	142.59	111.45	182.5	37.96	128.98	94.35	69.97
	Std. deviation	1.1	2.2	4.3	3.0	5.6	0.73	4.0	2.8	1.5
Bottom	Maximum (N)	47.79	82.55	129.6	83.26	172.1	37.39	95.99	84.09	74.33
	Minimum (N)	45.34	77.64	120.7	79.54	159.3	35.66	79.92	84.09	70.22
	Average	46.27	79.53	124.1	80.98	164.4	36.33	91.49	81.52	71.82
	Std. deviation	0.97	2.0	3.5	1.5	5.1	0.68	2.9	1.7	1.6
Wall 1	Maximum (N)	31.06	49.32	90.12	110.4	276.8	36.74	89.20		41.67
	Minimum (N)	29.53	46.17	83.66	103.6	259.4	34.94	82.99		39.07
	Average	30.12	47.382	86.13	106.2	266.1	35.63	85.37		40.08
	Std. deviation	0.61	1.3	2.6	2.7	6.9	0.71	2.5		1.0
Wall 2	Maximum (N)	30.96	44.73	83.15	85.19	276.4	29.14	94.05		34.82
	Minimum (N)	29.38	42.01	77.51	80.84	258.8	27.65	87.38		32.74
	Average	30.12	43.07	79.65	82.49	265.6	28.24	89.94		33.52
	Std. deviation	0.61	1.1	2.2	1.7	6.9	0.58	2.6		0.82
Wall 3	Maximum (N)	30.74	48.69	85.26	83.43	277.4	34.91	95.22		43.12
	Minimum (N)	29.13	45.21	79.30	79.19	259.8	32.75	88.29		39.90
	Average	29.98	46.52	81.55	80.82	266.6	33.58	90.89		41.20
	Std. deviation	0.62	1.4	2.4	1.7	6.97	0.85	2.8		1.3
Wall 4	Maximum (N)	29.32	45.53	79.26	82.88	279.8	29.49	105.3		35.36
	Minimum (N)	27.85	42.75	73.84	78.67	261.9	28.08	97.73		33.46
	Average	28.42	43.82	75.91	80.29	268.8	28.62	100.6		34.18
	Std. deviation	0.58	1.1	2.2	1.7	7.7	0.56	3.0		0.75