Investigation of Parameters of Fused Deposition Modelling 3D Prints with Compression Properties

Table 2

Samples and designed process parameters of 3D prints.

Infill type	Honeycomb					Gyroid		Honeycomb
Sample	1D	2D	3D	4D	5D	6G	13G	11D	12D
Infill %	2	4	6	2	2	2	2	4	4
Vertical walls	2	2	2	4	8	2	2	2	2
Horizontal contours	5	5	5	10	10	5	10	5	5
Dimension of print in mm^3	60 × 60 × 60	60 × 60 × 60	60 × 60 × 60	60 × 60 × 60	60 × 60 × 60	60 × 60 × 60	60 × 60 × 60	40 × 40 × 40	80 × 80 × 20
Mass in grams	28.14	33.81	41.20	46.95	70.26	26.47	33.72	13.15	26.91