[Retracted] Analysis of Temperature Distribution and Mechanical Properties of Friction Stir Welding of Al-Cu Joints Using Hardened H13 Steel Tools

<div>Vickers microhardness indentations: (Cu-AS) side: points 1–3 base metal area, points 3–6 HAZ and TMAZ, point 6 Al-Cu interface area (weld joint area), (Al-RS) side: points 6–9 TMAZ and HAZ, and points 9–11 base metal area (Al).</div>

Advances in Materials Science and Engineering

fig16

Figure 16

Figure 16: [Retracted] Analysis of Temperature Distribution and Mechanical Properties of Friction Stir Welding of Al-Cu Joints Using Hardened H13 Steel Tools 

Figure 16 | [Retracted] Analysis of Temperature Distribution and Mechanical Properties of Friction Stir Welding of Al-Cu Joints Using Hardened H13 Steel Tools 