A Comprehensive Review on the Optimization of the Fused Deposition Modeling Process Parameter for Better Tensile Strength of PLA-Printed Parts

<div>Graphical representation analysis of FDM process parameter value: (a) tensile strength vs. extrusion temperature, (b) tensile strength vs. bed temperature, (c) tensile strength vs. layer thickness, (d) tensile strength vs. infill density, (e) percentage of raster angle works for 45/−45°, and 0/90°, and (f) percentage of infill pattern works for linear, grid, cubic, rectilinear, zigzag, and hexagonal structures.</div>

Advances in Materials Science and Engineering

fig4

Figure 4

Figure 4: A Comprehensive Review on the Optimization of the Fused Deposition Modeling Process Parameter for Better Tensile Strength of PLA-Printed Parts 

Figure 4 | A Comprehensive Review on the Optimization of the Fused Deposition Modeling Process Parameter for Better Tensile Strength of PLA-Printed Parts 