Influence of Coal Cleats on Conical Pick Cutting Process Based on PFC

<table class="table-group" id="tab1"><tr><td><table class="table"><tr><td class="thead-hr" colspan="4"><hr/></td></tr><tr class="thead"><td class="align_left">Traction speed (m/s)</td><td class="align_center">Drum angular velocity (rad/s)</td><td class="align_center">Cutting radius (m)</td><td class="align_center">Installation angle (°)</td></tr><tr><td class="thead-hr" colspan="4"><hr/></td></tr><tr><td class="align_left">0.07</td><td class="align_center">5.76</td><td class="align_center">0.5</td><td class="align_center">45</td></tr><tr class="table-tr"><td colspan="4"><hr class="tbody-hr"/></td></tr></table></td></tr></table>

<div>The cutting parameters of conical pick.</div>

Advances in Materials Science and Engineering

tab1

Table 1

Table 1: Influence of Coal Cleats on Conical Pick Cutting Process Based on PFC 