Adhesion Enhancement on a Duplex DLC HiPIMS Positive Pulse Coating Performed by Active Screen Plasma Nitriding Pretreatment on 316L Stainless Steel Substrate

<div>Cross section SEM picture with the coating’s structure of DLC WC : C (a) and ASPN 400°C + DLC WC : C (b). From the bottom to top, the image shows the stainless-steel substrate, the bonding layer of Cr, the WC interlayer, and the W-doped layer.</div>

Advances in Materials Science and Engineering

fig1

Figure 1

Figure 1: Adhesion Enhancement on a Duplex DLC HiPIMS Positive Pulse Coating Performed by Active Screen Plasma Nitriding Pretreatment on 316L Stainless Steel Substrate 

Figure 1 | Adhesion Enhancement on a Duplex DLC HiPIMS Positive Pulse Coating Performed by Active Screen Plasma Nitriding Pretreatment on 316L Stainless Steel Substrate 