A Review of the Development Status of Wire Arc Additive Manufacturing Technology

<div>(a) Arc plasma flow characteristics at <i>Y</i> = 0 section at <i>t</i> = 14 ms under different magnetic flux densities: (A) 0 mT; (B) 1 mT; (C) 2 mT; (D) 4 mT. (b) The arc plasma flow characteristics at <i>Z</i> = 7.5 mm section at t = 14 ms under different magnetic flux densities: (A) 0 mT; (B) 1 mT; (C) 2 mT; (D) 4 mT.</div>

Advances in Materials Science and Engineering

fig18

Figure 18

Figure 18: A Review of the Development Status of Wire Arc Additive Manufacturing Technology 