[Retracted] Experimental Investigation on the Average Surface Roughness (Ra) of AlSi10Mg Alloy Manufactured by Laser Powder Bed Fusion Method

<table class="table-group" id="tab3"><tr><td><table class="table"><tr><td class="thead-hr" colspan="2"><hr/></td></tr><tr class="thead"><td class="align_left">Trials</td><td class="align_center">Deviation (mm)</td></tr><tr><td class="thead-hr" colspan="2"><hr/></td></tr><tr><td class="align_left">Sample 1</td><td class="align_center">0.1267</td></tr><tr><td class="align_left">Sample 2</td><td class="align_center">0.0768</td></tr><tr><td class="align_left">Sample 3</td><td class="align_center">0.0497</td></tr><tr><td class="align_left">Sample 4</td><td class="align_center">0.0921</td></tr><tr class="table-tr"><td colspan="2"><hr class="tbody-hr"/></td></tr></table></td></tr></table>

<div>The deviation between STL model and AlSi10Mg alloy.</div>

Advances in Materials Science and Engineering

tab3

Table 3

Table 3: [Retracted] Experimental Investigation on the Average Surface Roughness (Ra) of AlSi10Mg Alloy Manufactured by Laser Powder Bed Fusion Method 

Table 3 | [Retracted] Experimental Investigation on the Average Surface Roughness (Ra) of AlSi10Mg Alloy Manufactured by Laser Powder Bed Fusion Method 