Material Behaviour of Three Blade Propeller Using Metal Additive Manufacturing Techniques

Table 4

Variations of physical features are required based on the position to be printed.

Rank	Supported area (cm2)	Support volume (cm2)	Outbox volume (cm2)	Height (mm)	Centre of gravity height (mm)
1	29.900	87.121	1365	141.1	70.7
2	29.212	100.520	1108	150	75
3	29.278	100.808	1122	150	75
4	29.433	101.530	1108	150	75
5	29.846	101.885	1122	150	75
6	30.466	103.793	1108	147.7	72.7
7	32.006	107.250	1108	147.7	75
8	166.747	300.539	1108	50	21.9
9	166.747	300.540	1122	50	21.9
10	166.747	434.134	1108	50	28.1