Research Article
Optimization on Material Removal Rate and Surface Roughness of Stainless Steel 304 Wire Cut EDM by Response Surface Methodology
Table 7
Results obtained from experiment.
| Exp. no. | Input process parameter | Pulse on time(T-on),µs | Pulse off time (T- off),µs | Peak current(IP), amps | Coded | Actual | Coded | Actual | Coded | Actual |
| 1 | 1 | 125 | 0 | 53 | 0 | 190 | 2 | 0 | 115 | 1 | 63 | 0 | 190 | 3 | 0 | 115 | 0 | 53 | 0 | 190 | 4 | 0 | 115 | −1 | 43 | 0 | 190 | 5 | −1 | 105 | 1 | 63 | −1 | 170 | 6 | 0 | 115 | 0 | 53 | 1 | 210 | 7 | 1 | 125 | −1 | 43 | 1 | 210 | 8 | 0 | 115 | 0 | 53 | −1 | 170 | 9 | 0 | 115 | 0 | 53 | 0 | 190 | 10 | 0 | 115 | 0 | 53 | 0 | 190 | 11 | 0 | 115 | 0 | 53 | 0 | 190 | 12 | −1 | 105 | −1 | 43 | −1 | 170 | 13 | 1 | 125 | 1 | 63 | 1 | 210 | 14 | −1 | 105 | 0 | 43 | 0 | 190 | 15 | 1 | 125 | −1 | 43 | −1 | 170 | 16 | −1 | 105 | −1 | 43 | 1 | 210 | 17 | 0 | 115 | 0 | 53 | 0 | 190 | 18 | 0 | 115 | 0 | 53 | 0 | 190 | 19 | 1 | 125 | 1 | 63 | −1 | 170 | 20 | −1 | 105 | 1 | 63 | 1 | 210 |
|
|