Research Article
Optimization on Material Removal Rate and Surface Roughness of Stainless Steel 304 Wire Cut EDM by Response Surface Methodology
Table 9
Variance analysis for surface roughness, Ra.
| Source | DF | Seq-SS | Adj-SS | Adj-MS | F | P |
| Regression | 9 | 0.413512 | 0.413512 | 0.04592 | 78.52 | 0.000 | Linear | 3 | 0.109886 | 0.03622 | 0.012134 | 20.63 | 0.000 | Square | 3 | 0.087207 | 0.10881 | 0.036395 | 61.99 | 0.000 | Interactions | 3 | 0.21642 | 0.21642 | 0.072064 | 123.29 | 0.000 | Residual error | 10 | 0.005851 | 0.005851 | 0.000573 | - | - | Lack of fit | 5 | 0.004096 | 0.004096 | 0.000807 | 2.33 | 0.187 | Pure error | 5 | 0.001755 | 0.001755 | 0.00034 | - | - | Total | 19 | 0.419363 | - | - | - | - |
|
|