Wedm Process Optimization for Machining Characteristcis of AISI 52100 Grade Alloy Steel

Table 1

Machining parameters of wire-EDM affecting the output responses.

S.No.	Machining Parameter affecting the output	Reference
1	Pulse current	Paulson et al. [15]; Singh and Singh [30], Grigoriev [23], Özbek et al. [40]
2	Cutting wire Dia and material	Singh and Singh [30], Grigoriev [23],
3	cutting speeds	Kadam et al. [17]
4	Pulse-off time	Shabgard et al. [19], Kumar et al. [20]; Özbek et al. [40]
5	Pulse-On time	Shabgard et al. [19], Kumar et al. [20]; Özbek et al. [40]
6	Electrode and medium	Singh and Singh [30]
7	Cutting material	Hou et al. [14]; Anish Kumar et al. [21], Banu et al. [24]
8	Cutting depth	Özbek et al. [40]