Wedm Process Optimization for Machining Characteristcis of AISI 52100 Grade Alloy Steel

Table 2

Taguchi l27 OA for the optimization of wire-EDM machining process for AISI52100 grade steel.

Pulse on Time (µ sec)	Pulse OFF time (µ sec)	Wire Feed (m/min)	Wire tension	Spark Gap Voltage (V)	Servo Feed (mm/min)
1	11.5	8	1250	20	4
1	11.5	8	1250	25	6
1	11.5	8	1250	30	8
1	14	10	1450	20	4
1	14	10	1450	25	6
1	14	10	1450	30	8
1	18	12	1650	20	4
1	18	12	1650	25	6
1	18	12	1650	30	8
1.1	11.5	10	1650	20	6
1.1	11.5	10	1650	25	8
1.1	11.5	10	1650	30	4
1.1	14	12	1250	20	6
1.1	14	12	1250	25	8
1.1	14	12	1250	30	4
1.1	18	8	1450	20	6
1.1	18	8	1450	25	8
1.1	18	8	1450	30	4
1.2	11.5	12	1450	20	8
1.2	11.5	12	1450	25	4
1.2	11.5	12	1450	30	6
1.2	14	8	1650	20	8
1.2	14	8	1650	25	4
1.2	14	8	1650	30	6
1.2	18	10	1250	20	8
1.2	18	10	1250	25	4
1.2	18	10	1250	30	6