Research Article
[Retracted] Research on the Injection Mold Design and Molding Process Parameter Optimization of a Car Door Inner Panel
Table 4
Experimental design and results.
| Number | Factors | Indexes | A | B | C | D | E | Volume shrinkage (%) | Warpage deformation (mm) |
| 1 | 60 | 200 | 15 | 20 | 10 | 15.27 | 7.708 | 2 | 60 | 210 | 20 | 30 | 15 | 15.65 | 7.087 | 3 | 60 | 220 | 25 | 40 | 20 | 16.19 | 6.990 | 4 | 60 | 230 | 30 | 50 | 25 | 16.73 | 6.966 | 5 | 70 | 200 | 20 | 40 | 25 | 15.19 | 5.417 | 6 | 70 | 210 | 15 | 50 | 20 | 15.63 | 5.428 | 7 | 70 | 220 | 30 | 20 | 15 | 16.16 | 8.244 | 8 | 70 | 230 | 25 | 30 | 10 | 16.71 | 8.258 | 9 | 80 | 200 | 25 | 50 | 15 | 15.14 | 5.310 | 10 | 80 | 210 | 30 | 40 | 10 | 15.59 | 6.348 | 11 | 80 | 220 | 15 | 30 | 25 | 16.13 | 7.123 | 12 | 80 | 230 | 20 | 20 | 20 | 16.68 | 8.578 | 13 | 90 | 200 | 30 | 30 | 20 | 15.11 | 5.977 | 14 | 90 | 210 | 25 | 20 | 25 | 15.53 | 6.821 | 15 | 90 | 220 | 20 | 40 | 10 | 16.10 | 7.661 | 16 | 90 | 230 | 15 | 50 | 15 | 16.65 | 6.218 |
|
|