Research Article
[Retracted] Research on the Injection Mold Design and Molding Process Parameter Optimization of a Car Door Inner Panel
Table 6
Analysis of variance of volume shrinkage.
| Factors | Level1 | Level2 | Level3 | Level4 | Freedom | Mean-variance | F |
| Mold temperature | 0.3045 | 0.3796 | 0.3851 | 0.3977 | 3 | 0.366725 | 24.81 | Melt temperature | 0.014025 | 0.0021 | 0.00115 | 0.000925 | 3 | 0.00455 | ā | Cooling time | 0.2709 | 0.35745 | 0.4157 | 0.43245 | 3 | 0.369125 | 85.64 | Holding pressure | 0.30235 | 0.412375 | 0.207625 | 0.5181 | 3 | 0.360112 | 18.59 | Holding time | 0.296975 | 0.370125 | 0.41105 | 0.3987 | 3 | 0.369212 | 113.95 |
|
|