Research Article
[Retracted] Research on the Injection Mold Design and Molding Process Parameter Optimization of a Car Door Inner Panel
Table 7
Analysis of range of warpage deformation.
| | Factors | Level1 | Level2 | Level3 | Level4 | Range |
| | Mold temperature | 7.188 | 6.837 | 6.840 | 6.669 | 0.519 | | Melt temperature | 6.103 | 6.421 | 7.505 | 7.505 | 1.402 | | Cooling time | 7.494 | 7.186 | 7.055 | 6.884 | 0.61 | | Holding pressure | 6.133 | 7.111 | 6.604 | 5.981 | 1.13 | | Holding time | 7.494 | 6.715 | 6.743 | 6.582 | 0.912 |
|
|
