Research Article
[Retracted] Research on the Injection Mold Design and Molding Process Parameter Optimization of a Car Door Inner Panel
Table 8
Analysis of variance of warpage deformation.
| Factors | Level1 | Level2 | Level3 | Level4 | Freedom | Mean-variance | F |
| Mold temperature | 0.09227 | 2.00014 | 1.42092 | 0.42236 | 3 | 0.983923 | 84.38 | Melt temperature | 0.92284 | 0.39873 | 0.24540 | 0.91631 | 3 | 0.62082 | ā | Cooling time | 1.52024 | 1.32561 | 1.13780 | 0.74157 | 3 | 1.181305 | 174.52 | Holding pressure | 3.34708 | 0.65057 | 0.68519 | 0.44561 | 3 | 1.282113 | 251.91 | Holding time | 0.49267 | 1.17431 | 1.43605 | 0.46362 | 3 | 0.891663 | 43.37 |
|
|