Research Article
DEFORM 3D Simulations and Taguchi Analysis in Dry Turning of 35CND16 Steel
Figure 2
Simulated images of cutting force in the machining zone. (a) Cutting force: simulated at (V) 60 m/min, (S) 0.15 mm/rev, ap: 0.75 mm. (b) Cutting force: simulated at (V) 120 m/min, (S) 0.25 mm/rev ap: 1.25 mm. (c) Cutting force: simulated at (V) 150 m/min, (S) 0.55 mm/rev ap: 1.0 mm.
| (a) |
| (b) |
| (c) |