Wire Electrical Discharge Machining Characteristics of Al-4.4 Mg-0.7 Mn-0.15 Cr-12 wt.% MoO₃ Composites Using Taguchi Technique

Table 2

L16 orthogonal array experimental results.

Trial no.	TON (μs)	TOFF (μs)	I (A)	MRR (g/min)	SR (μm)
1	100	40	3	0.043	1.364
2	100	50	6	0.169	3.621
3	100	60	9	0.075	3.373
4	100	70	12	0.104	3.81
5	120	40	6	0.028	2.447
6	120	50	3	0.194	3.614
7	120	60	12	0.178	3.468
8	120	70	9	0.135	2.268
9	140	40	9	0.162	1.908
10	140	50	12	0.069	2.669
11	140	60	3	0.129	3.224
12	140	70	6	0.019	1.916
13	160	40	12	0.042	1.853
14	160	50	9	0.107	3.831
15	160	60	6	0.126	3.434
16	160	70	3	0.055	3.518