Influence of End Milling Process Variables on Material Removal Rate and Surface Roughness of Direct Metal Laser Sintered Inconel 718 Plate

Figure 6

Surface plot of MRR at depth of cut with the variable levels of 0.1, 0.2, and 0.3 mm, respectively. (a) Surface roughness versus feed rate. (b) Surface roughness versus depth of cut. (c) MRR versus cutting speed. (d) MRR versus depth of cut. (e) Surface roughness versus feed rate. (f) MRR versus depth of cut.

(a)

(b)

(c)

(d)

(e)

(f)