Optimization and Modeling of Radial Pitch Diameter Difference in Tapping of AISI H13

<table class="table-group" id="tab3"><tr><td><table class="table"><tr><td class="thead-hr" colspan="3"><hr/></td></tr><tr class="thead"><td class="align_left">Hone radius (<i>μ</i>m)</td><td class="align_center">Electric quantity (C)</td><td class="align_center">Time (s)</td></tr><tr><td class="thead-hr" colspan="3"><hr/></td></tr><tr><td class="align_left">10</td><td class="align_center">53</td><td class="align_center">12</td></tr><tr><td class="align_left">20</td><td class="align_center">100</td><td class="align_center">29</td></tr><tr class="table-tr"><td colspan="3"><hr class="tbody-hr"/></td></tr></table></td></tr></table>

<div>Preparation parameters of hone radius.</div>

Advances in Materials Science and Engineering

tab3

Table 3

Table 3: Optimization and Modeling of Radial Pitch Diameter Difference in Tapping of AISI H13 