A Novel 2D Metal Flow Model for Hot Rolling of Aluminum Alloy Thick Plate

Table 1

Rolling parameters applied in the comparison of experiments and metal flow model.

PASS	Entrance thickness (mm)/reduction (mm)/width (mm)/temperature (°C)
	No. 1	No. 2	No. 3	No. 4	No. 5
1	622.85/25.25/1317.8/497.5	612.65/25.25/1322.9/497.4	607.65/25.25/1322.9/497.4	612.65/25.34/1322.9/497.4	612.65/25.2/1353.3/497.4
2	597.6/32.4/1319.2/496.2	587.4/32.4/1324.3/496.2	582.4/32.4/1324.3/496.1	587.31/32.63/1324.3/496.2	587.42/32.37/1354.7/496.2
3	565.2/38.5/1321/494.8	555/38.4/1326.1/494.8	550/38.4/1326.1/494.7	555.68/38.39/1326.1/494.8	555.08/38.45/1356.5/494.8
4	527.7/45.5/1323.3/493.6	517.6/45.5/1328.4/493.5	512.6/45.6/1328.4/493.5	517.29/45.06/1328.4/493.5	517.63/45.07/1358.9/493.5
5	482.2/45.6/1326/492.4	472.1/45.6/1331.1/492.3	467/45.6/1331.2/492.2	472.23/45.5/1331.1/492.3	472.56/45.63/1361.6/492.3
6	437.6/34.6/1328.8/491	427.5/34.6/1333.9/490.9	427.4/34.6/1334/490.8	427.73/34.56/1333.9/490.9	427.93/34.64/1364.4/490.9
7	403/30.6/1331.6/489.5	398.9/30.6/1336.8/489.4	393.8/30.6/1336.8/489.3	393.17/30.59/1336.8/489.4	393.29/30.52/1367.3/489.4
8	373.4/20.6/1334.6/487.9	368.3/20.6/1339.8/487.7	363.2/20.6/1339.8/487.5	363.58/20.57/1339.8/487.6	363.77/20.66/1370.3/487.6