Multiobjective Optimization System of Extrusion Process Parameters for Targeted Microtubes Based on RSM and NSGA-II

Table 3

Orthogonal test schemes.

Test serial numbers	Factors			Corresponding parameters			Results
	A	B	C	q (ml/min)	(m/min)	n (r/min)	D (mm)	T (mm)
1	A 1	B 1	C 1	3	6	4	1.381	0.242
2	A 1	B 2	C 2	3	12	8	1.618	0.229
3	A 1	B 3	C 3	3	18	12	1.407	0.207
4	A 1	B 4	C 4	3	24	16	1.037	0.236
5	A 2	B 1	C 2	4	6	8	1.701	0.208
6	A 2	B 2	C 1	4	12	4	1.235	0.176
7	A 2	B 3	C 4	4	18	16	1.607	0.186
8	A 2	B 4	C 3	4	24	12	1.123	0.192
9	A 3	B 1	C 3	5	6	12	2.174	0.185
10	A 3	B 2	C 4	5	12	16	1.895	0.173
11	A 3	B 3	C 1	5	18	4	0.902	0.146
12	A 3	B 4	C 2	5	24	8	0.878	0.175
13	A 4	B 1	C 4	6	6	16	2.557	0.181
14	A 4	B 2	C 3	6	12	12	1.686	0.175
15	A 4	B 3	C 2	6	18	8	1.212	0.164
16	A 4	B 4	C 1	6	24	4	0.557	0.125