Effect of Load on Tribological Characteristics of H-AlSi24Cu3.8Mg0.8 Alloy Under Dry, Lubricated, and Coated (a–c: H) Sliding Conditions

<table class="table-group" id="tab3"><tr><td><table class="table"><tr><td class="thead-hr" colspan="2"><hr/></td></tr><tr class="thead"><td class="align_left">Lubricant properties</td><td class="align_center">Value</td></tr><tr><td class="thead-hr" colspan="2"><hr/></td></tr><tr><td class="align_left">Viscosity @100°C, mm<sup>2</sup>/s</td><td class="align_center">14.0</td></tr><tr><td class="align_left">Viscosity index</td><td class="align_center">115</td></tr><tr><td class="align_left">Flash point</td><td class="align_center">230°C</td></tr><tr><td class="align_left">Pour point</td><td class="align_center">−21°C</td></tr><tr class="table-tr"><td colspan="2"><hr class="tbody-hr"/></td></tr></table></td></tr></table>

<div>Properties of lubricant oil grade SAE20W40.</div>

Advances in Materials Science and Engineering

tab3

Table 3

Table 3: Effect of Load on Tribological Characteristics of H-AlSi24Cu3.8Mg0.8 Alloy Under Dry, Lubricated, and Coated (a–c: H) Sliding Conditions 