Study on External Gas-Assisted Mold Temperature Control for Improving the Melt Flow Length of Thin Rib Products in the Injection Molding Process

Table 3

Molding parameters for the melt flow length experiment.

No.	Molding parameters	Value
		PP material	ABS material
1	Melt temperature	210°C	230°C
2	Injection pressure	60 kg/cm^2
3	Cooling time	20 s
4	Injection speed	50 mm/s
5	Injection time	0.5 s
6	Packing time	2.5 s
7	Heating time	5 s, 10 s, 15 s, 20 s
8	Initial mold temperature	30°C
9	Glass transition temperature	100°C	105°C