Improvement in Mechanical Properties and Heat Resistance of PLLA-<i>b</i>-PEG-<i>b</i>-PLLA by Melt Blending with PDLA-<i>b</i>-PEG-<i>b</i>-PDLA for Potential Use as High-Performance Bioplastics

<div>Dimensional stability to heat at 80°C for 30 sec under 200 g load of blend films with PLLA-PEG-PLLA/PDLA-PEG-PDLA ratios of (a) 100/0, (b) 90/10, (c) 80/20, (d) 70/30, (e) 60/40, and (f) 50/50 (w/w).</div>

Advances in Polymer Technology

fig6

Figure 6

Figure 6: Improvement in Mechanical Properties and Heat Resistance of PLLA-<i>b</i>-PEG-<i>b</i>-PLLA by Melt Blending with PDLA-<i>b</i>-PEG-<i>b</i>-PDLA for Potential Use as High-Performance Bioplastics 

Figure 6 | Improvement in Mechanical Properties and Heat Resistance of PLLA-b-PEG-b-PLLA by Melt Blending with PDLA-b-PEG-b-PDLA for Potential Use as High-Performance Bioplastics 