Metallocene Polyolefins Reinforced by Low-Entanglement UHMWPE through Interfacial Entanglements

Figure 4

(a) Melt flow rate of three blends. (b) Normalized MFR (melt flow rate) of three blends. (c) Modulus versus frequency at 190°C for EPDM/U1 and LLDPE/U1. (d) Crossover frequency versus UHMWPE content at 190°C for EPDM/U and LLDPE/U.

(a)

(b)

(c)

(d)